Glider RADAR - Symbols

APRS symbols

The following APRS symbols is currently supported. Please note that the description of each symbol is based on a combination of the version 1.1 spec. and the version 1.2 spec. from www.aprs.org (and on usages that we have found to be common).

In this list we include all primary symbols, all default alternate symbols, all overlayed alternate symbols that has a specified description and all overlayed alternate symbols that is used by some station.

<< < Previous page

1 2 3 4 5 6 7 8 9 10 11 12 13

Next page >

C¹	T²	Type	Icon	Description	Stations³
t	\	Alternate	$Symbol t\$	Tornado	0
u	/	Primary		Truck (18 wheeler)	0
u	\	Alternate (supports overlay)	$Symbol u\$	Truck	0
u	B	Alternate (with overlay)		Truck (Buldozer/construction/Backhoe)	0
u	C	Alternate (with overlay)		Truck (Chlorine Tanker)	0
u	G	Alternate (with overlay)		Truck (Gas)	0
u	H	Alternate (with overlay)		Truck (Hazardous)	0
u	P	Alternate (with overlay)		Truck (Plow or SnowPlow)	0
u	T	Alternate (with overlay)		Truck (Tanker)	0
v	/	Primary		Van	0
v	\	Alternate (supports overlay)	$Symbol v\$	Van	0
w	/	Primary		Water Station	0
w	\	Alternate	$Symbol w\$	Flooding	0
x	/	Primary		xAPRS (Unix)	0
x	\	Alternate	$Symbol x\$	No Symbol	0
y	/	Primary		Yagi @ QTH	0
y	\	Alternate	$Symbol y\$	Skywarn	0
z	/	Primary		Shelter	2
z	\	Alternate (supports overlay)	$Symbol z\$	Shelter	0
z	C	Alternate (with overlay)		Clinic	0
z	G	Alternate (with overlay)		Government building	0
z	M	Alternate (with overlay)		Morgue	0
z	T	Alternate (with overlay)		Triage	0
{	/	Primary		No Symbol	0
{	\	Alternate	$Symbol {\$	Fog	0
\|	/	Primary		TNC Stream Switch	0
\|	\	Alternate	$Symbol \|\$	TNC Stream Switch	0
}	/	Primary		No Symbol	0
}	\	Alternate	$Symbol }\$	No Symbol	0
~	/	Primary		TNC Stream Switch	0

<< < Previous page Next page >

Symbol Code (the character found after the longitude in the APRS packet)
Symbol Table ID (the character found between the latitude and longitude in the APRS packet)
Number of stations/objects using this symbol the latest 24 hours (if station/object use several symbols only the latest used counts)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time:

reset

Current time is:

reset

Station filter

reset