ID:
SCHMITTEN
Symbol:
Latest symbol  Igate (Generic)
Latest Packet:
Position Packet
Receive Time:
Age:
Path2:
APRS via TCPIP*,qAC,GLIDERN4
Latest Forwarded:
Receive Time:
1569160677
Latest Status:
101917h v0.2.6.RPI-GPU CPU:0.2 RAM:727.0/971.1MB NTP:0.4ms/-12.8ppm +41.3C 6/7Acfts[1h] RF:-2+0.3ppm/+2.49dB/-8.5dB@10km[21424]/-5.7dB@10km[10/20]
Receive Time:
1564137170
Latest Position3:
47.3295, 12.7381666666667
Receive Time:
(Received in latest packet)
 
Locator4:
Altitude:
6560.01 ft
Nearby locations:
Viehhofen , Austria 2.58 miles
Zell am See , Austria 2.65 miles
Piesendorf , Austria 2.83 miles
Thumersbach , Austria 3.68 miles
Latest symbol
 
Nearby stations/objects:
Symbol  WALTER 2.56 miles
Symbol  UNKNOWN675911 3.41 miles
Symbol  LOWZ 3.48 miles
Symbol  UNKNOWN675044 3.49 miles
Symbol  UNKNOWN676188 3.61 miles
Symbol  ICA4403CA 11.42 miles
Symbol  UNKNOWN676223 17.18 miles
Symbol  FLRDD831A 17.46 miles
Symbol  KITZBUEHL 18.07 miles
Symbol  STJOHANN 19.53 miles
Symbol  UNKNOWN675861 20.02 miles
Symbol  UNKNOWN675455 25.34 miles
Symbol  BADRHALL 28.1 miles
Symbol  UNKNOWN676275 30.71 miles
Symbol  ICA3EDBF7 32.62 miles
 

  1. We receive all packets from the Open Glider Network. The goal of the Open Glider Network project is to create a unified platform for tracking aircraft equipped with FLARM and OGN trackers.
  2. To get a better understanding of the APRS path I recommend reading the explanation written by wa8lmf.
  3. Position accordning to the Google geocoding service, based on the reported latitude and longitude (if we get no valid position from the Google gecoding service we will show the latitude and longitude).
  4. This is the Maidenhead Grid Square Locator, used by ham radio operators to specify a location (using few characters).
Initial position
Current position
Ruler

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time:

reset

Glider RADAR


Current time is:


reset

Station filter


reset
Loading Loading
LocatingLocating
Searching Searching