ID:
ICA45C898

Aircraft Registration2:
OY-RDX
Aircraft CN:
DX
Aircraft Type3:
Glider/Motoglider
Aircraft Model:
DG-400
Latest Packet:
Position Packet
Receive Time:
Age:
Path4:
APRS via qAS,EKGL
 
Signal to Noise Ratio5:
3.8 dB
Bits corrected6:
1
Frequency Offset:
-2.7 kHz
Latest symbol
Search for OY-RDX photos!

(Link to www.jetphotos.com)


See OY-RDX signal strength report!

(Link to www.kisstech.ch)

 

  1. We receive all packets from the Open Glider Network. The goal of the Open Glider Network project is to create a unified platform for tracking aircraft equipped with FLARM and OGN trackers.
  2. Aircraft device details such as Registration, CN and Aircraft Model is collected from the OGN Devices DataBase. We will only display information that can be used to identify an aircraft if the aircraft device details exists in the OGN Devices DataBase, and if the setting "I don't want this device to be identified" is deactivated.
  3. We primarily get information about aircraft type from the OGN Devices DataBase, if the aircraft is not registered in the OGN Devices DataBase or if the aircraft does not want to be identified, the aircraft type indicated in the FLARM/OGN packet is displayed. We also adapt which symbol that is used based on the selected aircraft type.
  4. To get a better understanding of the APRS path I recommend reading the explanation written by wa8lmf.
  5. According to OGN, 4-5dB is about the limit of meaningful reception (but currently we still save packets with low SNR).
  6. According to OGN, it is recommended that you ignore packets that have a high CRC error rate (>5) as their information may be corrupt (but currently we still save packets with high CRC error rate).
Initial position
Current position
Ruler

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time:

reset

Glider RADAR


Current time is:


reset

Station filter


reset
Loading Loading
LocatingLocating
Searching Searching