ID:
LETZI
Symbol:
Latest symbol  Igate (Generic)
Latest Packet:
Position Packet
Receive Time:
Age:
Path2:
OGNSDR via TCPIP*,qAC,GLIDERN5
Latest Forwarded:
Receive Time:
1566235807
Latest Comment:
Letzi DX Group - HB9CA - http://hb9ca.cqdx.ch
Receive Time:
1555041095
Latest Status:
105333h v0.2.7.RPI-GPU CPU:2.6 RAM:712.3/971.1MB NTP:0.5ms/+1.3ppm +71.3C 57/58Acfts[1h] Lat:4.5s RF:+0+0.0ppm/+5.54dB/+18.2dB@10km[4332859]/+21.9dB@10km[139/278]
Receive Time:
1564138502
Latest Position3:
47.5088333333333, 8.128
Receive Time:
(Received in latest packet)
 
Locator4:
Altitude:
2113 ft
Nearby locations:
Gansingen , Switzerland 2.38 miles
Sulz , Switzerland 2.39 miles
Villnachern , Switzerland 3.01 miles
Schinznach Dorf , Switzerland 4.35 miles
Latest symbol
 
Nearby stations/objects:
Symbol  BRUGG 4.64 miles
Symbol  USIGG 6.34 miles
Symbol  LSZI 8.19 miles
Symbol  NEUENHOF 10.44 miles
Symbol  PWOENTFEL 11.38 miles
Symbol  OENTFELD2 11.38 miles
Symbol  COVENTRY 11.56 miles
Symbol  TEST2 11.56 miles
Symbol  PWTEST2 11.56 miles
Symbol  PWCOVENTR 11.56 miles
Symbol  LSPO 16.01 miles
Symbol  LSZU 18.73 miles
Symbol  PRT 20.27 miles
Symbol  LSZO2 22.23 miles
Symbol  LSZO 22.24 miles
 

  1. We receive all packets from the Open Glider Network. The goal of the Open Glider Network project is to create a unified platform for tracking aircraft equipped with FLARM and OGN trackers.
  2. To get a better understanding of the APRS path I recommend reading the explanation written by wa8lmf.
  3. Position accordning to the Google geocoding service, based on the reported latitude and longitude (if we get no valid position from the Google gecoding service we will show the latitude and longitude).
  4. This is the Maidenhead Grid Square Locator, used by ham radio operators to specify a location (using few characters).
Initial position
Current position
Ruler

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time:

reset

Glider RADAR


Current time is:


reset

Station filter


reset
Loading Loading
LocatingLocating
Searching Searching