ID:
RUEPPURR2
Symbol:
Latest symbol  Igate (Generic)
Latest Packet:
Position Packet
Receive Time:
Age:
Path2:
APRS via TCPIP*,qAC,GLIDERN4
Latest Forwarded:
Receive Time:
1566566585
Latest Status:
091511h v0.2.6.RPI-GPU CPU:0.5 RAM:666.9/972.2MB NTP:0.5ms/-8.0ppm +70.4C 1/1Acfts[1h] RF:+0-0.5ppm/-0.89dB/+0.3dB@10km[742352]/+7.7dB@10km[11/22]
Receive Time:
1564135852
Latest Position3:
48.9673333333333, 8.40833333333333
Receive Time:
(Received in latest packet)
 
Locator4:
Altitude:
413 ft
Nearby locations:
Ettlingen , Germany 1.82 miles
Karlsruhe , Germany 2.91 miles
Rheinstetten , Germany 4.6 miles
Eggenstein-Leopoldshafen , Germany 8.49 miles
Latest symbol
 
Nearby stations/objects:
Symbol  RUEPPURR 21 yd
Symbol  UNKNOWN607576 2.1 miles
Symbol  FLRDD9A66 3.12 miles
Symbol  RHST 3.15 miles
Symbol  FLRD00929 3.63 miles
Symbol  ICA3ECC36 3.75 miles
Symbol  UNKNOWN608051 10.75 miles
Symbol  UNKNOWN608154 12.19 miles
Symbol  UNKNOWN608454 12.76 miles
Symbol  UNKNOWN607580 13.12 miles
Symbol  UNKNOWN607577 13.53 miles
Symbol  RUELZHEIM 14.09 miles
Symbol  UNKNOWN607581 18.63 miles
Symbol  MUHLACKER 19.3 miles
Symbol  UNKNOWN608474 23.66 miles
 

  1. We receive all packets from the Open Glider Network. The goal of the Open Glider Network project is to create a unified platform for tracking aircraft equipped with FLARM and OGN trackers.
  2. To get a better understanding of the APRS path I recommend reading the explanation written by wa8lmf.
  3. Position accordning to the Google geocoding service, based on the reported latitude and longitude (if we get no valid position from the Google gecoding service we will show the latitude and longitude).
  4. This is the Maidenhead Grid Square Locator, used by ham radio operators to specify a location (using few characters).
Initial position
Current position
Ruler

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time:

reset

Glider RADAR


Current time is:


reset

Station filter


reset
Loading Loading
LocatingLocating
Searching Searching