Glider RADAR - LOWZ details

ID:

LOWZ

Source¹:

OGN (Open Glider Network)

Symbol:

Igate (Generic)

Latest Packet:

Position Packet

Receive Time:

Age:

Path²:

APRS via TCPIP*,qAC,GLIDERN4

Latest Forwarded:

FLR25A304

Receive Time:

1566566745

Latest Status:

104202h v0.2.6.ARM CPU:0.7 RAM:773.1/968.2MB NTP:0.3ms/+4.0ppm +56.8C 15/16Acfts[1h] RF:+20-20.9ppm/-1.15dB/+6.7dB@10km[270654]/+9.4dB@10km[26/51]

Receive Time:

1564138119

Latest Position³:

47.2921666666667, 12.788

Receive Time:

(Received in latest packet)

Show on map

Locator⁴:

Altitude:

2467 ft

Nearby locations:

Bruck an der Großglocknerstra... , Austria 1.72 miles
Kaprun , Austria 1.9 miles
Zell am See , Austria 2.33 miles
Thumersbach , Austria 2.91 miles

Nearby stations/objects:

FLR25A304 157 yd
Symbol

FLRDDBF4D 237 yd
Symbol

UNKNOWN608215 0.98 miles
Symbol

FLRDDEE8B 1.34 miles
Symbol

WALTER 2.26 miles
Symbol

UNKNOWN607823 3.43 miles
Symbol

SCHMITTEN 3.48 miles
Symbol

ICA44030E 3.73 miles
Symbol

ICA4409A3 6.07 miles
Symbol

ICA44098C 16.41 miles
Symbol

KITZBUEHL 21.11 miles
Symbol

FLRDD84B5 22.09 miles
Symbol

FLRDD984D 22.3 miles
Symbol

ICA4404FF 23.84 miles
Symbol

BADRHALL 30.2 miles

We receive all packets from the Open Glider Network. The goal of the Open Glider Network project is to create a unified platform for tracking aircraft equipped with FLARM and OGN trackers.
To get a better understanding of the APRS path I recommend reading the explanation written by wa8lmf.
Position accordning to the Google geocoding service, based on the reported latitude and longitude (if we get no valid position from the Google gecoding service we will show the latitude and longitude).
This is the Maidenhead Grid Square Locator, used by ham radio operators to specify a location (using few characters).

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time:

reset

Current time is:

reset

Station filter

reset