ID:
PAWF443D0

Aircraft Registration2:
ZENAIR
Aircraft Type3:
Other
Aircraft Model:
Ground Station
Latest Packet:
Position Packet
Receive Time:
Age:
Path4:
OGPAW via qAS,ZENAIR
 
Signal to Noise Ratio5:
57.8 dB
Frequency Offset:
0.2 kHz
Latest Position6:
52.3006666666667, 13.4273333333333
Receive Time:
(Received in latest packet)
 
Locator7:
Speed:
0 mph
Course:
Altitude:
158 ft
Latest symbol
Search for ZENAIR photos!

(Link to www.jetphotos.com)


See ZENAIR signal strength report!

(Link to www.kisstech.ch)

 
Nearby stations/objects:
Symbol  ZENAIR 0 yd
Symbol  PWZENAIR 0 yd
Symbol  ICA3E0F91 10.79 miles
Symbol  ASBerlin 12.88 miles
Symbol  peli3 13.11 miles
Symbol  Schoenha 13.3 miles
Symbol  UNKNOWN2426239 13.3 miles
Symbol  peli1 15.45 miles
Symbol  Spandau 17.7 miles
Symbol  PWARELE 19.49 miles
Symbol  ARELE 19.49 miles
Symbol  Luesse 33.85 miles
Symbol  EDOJ 33.9 miles
Symbol  EDAV1 38.34 miles
Symbol  peli2 39.87 miles
 

  1. We receive all packets from the Open Glider Network. The goal of the Open Glider Network project is to create a unified platform for tracking aircraft equipped with FLARM and OGN trackers.
  2. Aircraft device details such as Registration, CN and Aircraft Model is collected from the OGN Devices DataBase. We will only display information that can be used to identify an aircraft if the aircraft device details exists in the OGN Devices DataBase, and if the setting "I don't want this device to be identified" is deactivated.
  3. We primarily get information about aircraft type from the OGN Devices DataBase, if the aircraft is not registered in the OGN Devices DataBase or if the aircraft does not want to be identified, the aircraft type indicated in the FLARM/OGN packet is displayed. We also adapt which symbol that is used based on the selected aircraft type.
  4. To get a better understanding of the APRS path I recommend reading the explanation written by wa8lmf.
  5. According to OGN, 4-5dB is about the limit of meaningful reception (but currently we still save packets with low SNR).
  6. Position accordning to the Google geocoding service, based on the reported latitude and longitude (if we get no valid position from the Google gecoding service we will show the latitude and longitude).
  7. This is the Maidenhead Grid Square Locator, used by ham radio operators to specify a location (using few characters).
Initial position
Current position
Ruler

Glider RADAR


Station filter


reset
Loading Loading
LocatingLocating
Searching Searching