ID:
LOIJ
Symbol:
Latest symbol  Igate (Generic)
Latest Packet:
Position Packet
Receive Time:
Age:
Path2:
APRS via TCPIP*,qAC,GLIDERN5
Latest Forwarded:
Receive Time:
1569135650
Latest Status:
081422h v0.2.6.RPI-GPU CPU:0.5 RAM:764.3/972.2MB NTP:0.8ms/-5.3ppm +65.5C 2/2Acfts[1h] RF:-1-0.4ppm/+9.25dB/+10.5dB@10km[658]/+11.3dB@10km[1/2]
Receive Time:
1568276085
Latest Position3:
47.5191666666667, 12.4483333333333
Receive Time:
(Received in latest packet)
 
Locator4:
Altitude:
2198 ft
Nearby locations:
Sankt Johann in Tirol , Austria 1.21 miles
Kirchdorf in Tirol , Austria 2.57 miles
Oberndorf in Tirol , Austria 3.31 miles
Erpfendorf , Austria 4.51 miles
Latest symbol
 
Nearby stations/objects:
Symbol  STJOHANN 1.15 miles
Symbol  UNKNOWN675861 3.09 miles
Symbol  ICA4403CA 7.54 miles
Symbol  UNKNOWN675455 7.65 miles
Symbol  KITZBUEHL 8.91 miles
Symbol  FLRDDA9C1 14.46 miles
Symbol  FLRDD989A 14.48 miles
Symbol  FLRDD988A 14.48 miles
Symbol  FLRDD92F1 14.49 miles
Symbol  ICA3EDD36 14.49 miles
Symbol  DASSU2 14.58 miles
Symbol  FLRDD9689 14.59 miles
Symbol  FLRDDAF4E 14.6 miles
Symbol  FSGU1 14.63 miles
Symbol  FLRDDC474 14.63 miles
 

  1. We receive all packets from the Open Glider Network. The goal of the Open Glider Network project is to create a unified platform for tracking aircraft equipped with FLARM and OGN trackers.
  2. To get a better understanding of the APRS path I recommend reading the explanation written by wa8lmf.
  3. Position accordning to the Google geocoding service, based on the reported latitude and longitude (if we get no valid position from the Google gecoding service we will show the latitude and longitude).
  4. This is the Maidenhead Grid Square Locator, used by ham radio operators to specify a location (using few characters).
Initial position
Current position
Ruler

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time:

reset

Glider RADAR


Current time is:


reset

Station filter


reset
Loading Loading
LocatingLocating
Searching Searching