ID:
OGN484D20

Aircraft Registration2:
TataT2
Aircraft CN:
TT2
Aircraft Type:
Glider
Aircraft Model:
Ground Station
Latest Packet:
Position Packet
Receive Time:
Age:
Path3:
APRS via RELAY*,qAS,LHTAW02
 
Latest Position4:
47.6499833333333, 18.32525
Receive Time:
(Received in latest packet)
 
Locator5:
Speed:
0 km/h
Course:
226°
Altitude:
139.9 m
Climb Rate:
20 fpm
Turn Rate6:
0 rot
Nearby locations:
Tata , Hungary 608 m
Baj , Hungary 2.95 km
Szomód , Hungary 4.05 km
Dunaalmás , Hungary 8.75 km
Latest symbol
Search for TataT2 photos!

(Link to www.jetphotos.com)


See TataT2 signal strength report!

(Link to www.kisstech.ch)

 
Nearby stations/objects:
Symbol  OGN2C4B07 16 m
Symbol  LHTAW02 301 m
Symbol  LHEM 33.09 km
Symbol  LHFH2 47.33 km
Symbol  LHBS 54.38 km
Symbol  LHBD 58.98 km
Symbol  LHDK 61.45 km
Symbol  LZNI 71.34 km
Symbol  KESZEG 72.23 km
Symbol  OGN2A4B49 72.25 km
Symbol  LHSK 89.34 km
 

  1. We receive all packets from the Open Glider Network. The goal of the Open Glider Network project is to create a unified platform for tracking aircraft equipped with FLARM and OGN trackers.
  2. Aircraft device details such as Registration, CN and Aircraft Model is collected from the OGN Devices DataBase. We will only display information that can be used to identify an aircraft if the aircraft device details exists in the OGN Devices DataBase, and if the setting "I don't want this device to be identified" is deactivated.
  3. To get a better understanding of the APRS path I recommend reading the explanation written by wa8lmf.
  4. Position accordning to the Google geocoding service, based on the reported latitude and longitude (if we get no valid position from the Google gecoding service we will show the latitude and longitude).
  5. This is the Maidenhead Grid Square Locator, used by ham radio operators to specify a location (using few characters).
  6. 1rot is the standard aircraft rotation rate of 1 half-turn per minute (equal to 1.5° per second).
Initial position
Current position
Ruler

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time:

reset

Glider RADAR


Current time is:


reset

Station filter


reset
Loading Loading
LocatingLocating
Searching Searching